Enterprise Electronics Corporation MINIMAX-100C Manuel D’Utilisation
Technical Description for MINIMAX:
Transmitter Chain:
Transmitter Chain:
The transmitted RF pulse is generated by a 60MHz Coherent Oscillator
(COHO) operating in a CW mode and pulsed via a high isolation switch which is
then up-converted to the operating RF frequency. The up-convert mixer is of the
triple balanced topology providing generally 25dB of suppression. This RF
pulsed signal is filtered via a 6-cavity tunable filter to ensure that no mixer images
or spurious emissions are generated. A signal preamplifier is then used to
amplify this signal to the level necessary for the high power amplifier. A solid
state amplifier utilizing “
then up-converted to the operating RF frequency. The up-convert mixer is of the
triple balanced topology providing generally 25dB of suppression. This RF
pulsed signal is filtered via a 6-cavity tunable filter to ensure that no mixer images
or spurious emissions are generated. A signal preamplifier is then used to
amplify this signal to the level necessary for the high power amplifier. A solid
state amplifier utilizing “
Gallium Arsenide Field Effect Transisors” (GaAsFET
). The
GaAsFET’s comprise individual power modules which are then combined with
phase matched power combiners to achieve the required power output. Finally,
a harmonic filter is used to eliminate any spurious and harmonic emissions.
Receiver Chain:
phase matched power combiners to achieve the required power output. Finally,
a harmonic filter is used to eliminate any spurious and harmonic emissions.
Receiver Chain:
The receiver is comprised of a Low Noise Amplifier setting a front end
noise figure of 2.5dB. A 6-pole cavity tunable filter is used as a pre-selector then
to eliminate out of band interferers and to limit spectral content available for
processing. A double balanced mixer is used as a single stage down-converter
with an Intermediate Frequency (IF) of 60MHz. This IF is further processed with
an amplifier, Linear and Logarithmic amplifiers, and a quad phase detector to
form the Intensity and Quadrature (IQ) signals necessary for digitization and
weather moment processing
to eliminate out of band interferers and to limit spectral content available for
processing. A double balanced mixer is used as a single stage down-converter
with an Intermediate Frequency (IF) of 60MHz. This IF is further processed with
an amplifier, Linear and Logarithmic amplifiers, and a quad phase detector to
form the Intensity and Quadrature (IQ) signals necessary for digitization and
weather moment processing