HARRIS CORPORATION M803M Manuel D’Utilisation
Display Panel Functions—CHAPTER 4
Software Version OTP 5.07
M-803 Operator Manual 35
1.) Repeatedly Press the Up or Down key to cycle
through the list of available Menu headings. When
the Menu you want appears in the Top line of the
Display Screen . . .
the Menu you want appears in the Top line of the
Display Screen . . .
2.) Repeatedly Press the Left or Right key to cycle
through the list of available options for the Menu.
When the option you want appears in the Bottom
line of the Display Screen . . .
When the option you want appears in the Bottom
line of the Display Screen . . .
3.) Press the Select button to lock in your choice.
When the M-803 accepts your choice, the display
screen will revert to the user-selectable Dwell Display
you’ve chosen.
screen will revert to the user-selectable Dwell Display
you’ve chosen.
Select Dwell Display
There is no specific “default screen” for the M-803.
Rather, there are several user-selectable options for the
categories of feedback the radio will display during
operation. See the Getting Started chapter for a full
discussion of your dwell display options.
Rather, there are several user-selectable options for the
categories of feedback the radio will display during
operation. See the Getting Started chapter for a full
discussion of your dwell display options.
The first line of any Dwell Display for Open Sky
trunked mode operation is always the currently active
Transmit Talkgroup for your selected profile.
trunked mode operation is always the currently active
Transmit Talkgroup for your selected profile.
What appears in the second line, though, depends on
what choice you make from the Dwell Display Menu
for your default display preference.
what choice you make from the Dwell Display Menu
for your default display preference.
In short, you’ll use the menu buttons to establish your
own default screen, depending on whether you want
your radio to display the current Profile, the Channel,
your current Caller, or your current caller’s Talkgroup.
own default screen, depending on whether you want
your radio to display the current Profile, the Channel,
your current Caller, or your current caller’s Talkgroup.
If you’re happy with the
dwell display when your
radio Powers Up, do
nothing. You only need to
change your Dwell Display
to get information the radio
is not already providing.
radio Powers Up, do
nothing. You only need to
change your Dwell Display
to get information the radio
is not already providing.