Tyco Safety Products/Sensormatic AMB43 Manuel D’Utilisation
ZBAMB4300 SYNC ACCESS POINT
8200-0958-03, REV. 2B
INSTALLATION GUIDE
3 of 7
Safety
WARNING:
Install the AP in an air space not used
for environmental air. DO NOT install
it in a plenum or other environmental
air-handling space.
it in a plenum or other environmental
air-handling space.
Cables placed in environmental
airspace must be plenum rated unless
the cables are in raceways.
the cables are in raceways.
All wiring must be through conduit.
Ensure that all safety instructions
Ensure that all safety instructions
within this manual are continuously
observed and respected during the
installation and/or operation of this
device.
observed and respected during the
installation and/or operation of this
device.
Mount the AP only as shown in this
guide. Mounting the module any other
way may affect its operation.
way may affect its operation.
The manufacturer is not responsible
for any radio or TV interference
caused by unauthorized modifications
to this equipment. Such modifications
could void the user’s authority to
operate the equipment.
caused by unauthorized modifications
to this equipment. Such modifications
could void the user’s authority to
operate the equipment.
The antennas used for this transmitter
must be installed to provide a
separation distance of at least 20cm
(8in) from all persons and must not be
collocated or operating in conjunction
with any other antenna or transmitter.
separation distance of at least 20cm
(8in) from all persons and must not be
collocated or operating in conjunction
with any other antenna or transmitter.
Parts Required
Supplied
Part
Qty.
Part Number
Power Supply Module*
1
5606-0079-01
Install Kit (indoor install only)
1
0352-0580-01
Connector, Female, RJ45
1
2109-0717-01
Cable, Cat5, 4.6m (15ft)
1
6003-0266-02
Coupler, Female-to-Female, Cat5
1
2109-0906-01
* Includes power cord 0352-0547-xx.
Not Supplied (Order Separately)
Part
Qty. Part Number
Install Kit (for outdoor enclosure)
1
0352-0591-01
Bracket, Mounting
1
0505-1544-01
Bracket, Corner/Wall Mount
1
0500-7844-01
Screw, Self-Tapping, PHP,
#6x34in
#6x34in
4
2816-7634-32
Screw, Tapcon, HXWH,
3/16x3/4in
3/16x3/4in
4
2816-7683-02
Drill Bit, Tapcon, 5/32x3-1/2in
1
2816-7683-10
Anchor, HLW Wall, ¼-20, 1/8-5/8
4
2880-0025-02
Screw, Mach, M3x8, PHP (not
used)
used)
1
5801-1051-120
Screw, Self-Tapping, 8x32, PHP
4
5810-5091-120
Nut, Locking, M3 (not used)
2
5826-0200-020
Nut, Locking, M4
4
5826-0300-020
Purchase
Part
Qty.
3/4-inch Conduit, Preferred (as required)
–
4x4 Electrical Box, Deep
1