Tyco Safety Products/Sensormatic DEACSTP Manuel D’Utilisation
10
PLANNING GUIDE FOR BETA TEST
STP POWER PAD DEACTIVATOR
8000-2599-01, Rev. A
Auxiliary I/O
This I/O port is user configurable for internal power
or external drive options. Vcc and Ground are
available at the port pins.
or external drive options. Vcc and Ground are
available at the port pins.
Inputs (two).........................Opto-coupled diode
10mA, typical /60mA
max drive
max drive
Output.................................Opto-coupled transistor
max capacity 150mA
Connector...........................8-position modular
phone jack
RS485 ................................(?)
Environmental
Operating temperature .......0°C to 50°C
(32°F to 122°F)
Non-operating temp. ..........–40°C to 70°C
(–40°F to 158°F)
Relative humidity ................0 to 90% non-
condensing
Mechanical
Power pack:
Weight.............................4 kg (9 lbs)
Length .............................38 cm (14.9")
Width...............................22.6 cm (9")
Height..............................14.4 cm (5.5")
Power cord .........................3 m (10')
Power Pad Antenna:
Weight.............................10 kg (22 lbs)
Length .............................39.3 cm (15.5")
Width...............................17 cm (6.75")
Height..............................5.6 cm (2.2")
Remote Indicator Module:
Length .............................82.5mm (3.3")
Width...............................59mm (2.3")
Depth ..............................30mm (1.2")
Declarations
Regulatory Compliance
Emissions .......................... 47 CFR, Part 15,
Class A
ETS 300 330
ETS 300 683
Bapt 222 (Germany)
EN61000-3-2
EN61000-3-3
VDE 0848
ETS 300 330
ETS 300 683
Bapt 222 (Germany)
EN61000-3-2
EN61000-3-3
VDE 0848
Safety................................. UL1950
CSA C22.2 No 950
EN 60 950
EN 60 950
FCC COMPLIANCE: This equipment complies with Part 15
of the FCC rules for intentional radiators and Class A digital
devices when installed and used in accordance with the
instruction manual. Following these rules provides reasonable
protection against harmful interference from equipment
operated in a commercial area. This equipment should not be
installed in a residential area as it can radiate radio frequency
energy that could interfere with radio communications, a
situation the user would have to fix at their own expense.
of the FCC rules for intentional radiators and Class A digital
devices when installed and used in accordance with the
instruction manual. Following these rules provides reasonable
protection against harmful interference from equipment
operated in a commercial area. This equipment should not be
installed in a residential area as it can radiate radio frequency
energy that could interfere with radio communications, a
situation the user would have to fix at their own expense.
EQUIPMENT MODIFICATION CAUTION: Equipment
changes or modifications not expressly approved by
Sensormatic Electronics Corporation, the party responsible
for FCC compliance, could void the user's authority to operate
the equipment and could create a hazardous condition.
changes or modifications not expressly approved by
Sensormatic Electronics Corporation, the party responsible
for FCC compliance, could void the user's authority to operate
the equipment and could create a hazardous condition.
Other Declarations
WARRANTY DISCLAIMER: Sensormatic Electronics
Corporation makes no representation or warranty with respect
to the contents hereof and specifically disclaims any implied
warranties of merchantability or fitness for any particular
purpose. Further, Sensormatic Electronics Corporation
reserves the right to revise this publication and make changes
from time to time in the content hereof without obligation of
Sensormatic Electronics Corporation to notify any person of
such revision or changes.
Corporation makes no representation or warranty with respect
to the contents hereof and specifically disclaims any implied
warranties of merchantability or fitness for any particular
purpose. Further, Sensormatic Electronics Corporation
reserves the right to revise this publication and make changes
from time to time in the content hereof without obligation of
Sensormatic Electronics Corporation to notify any person of
such revision or changes.
LIMITED RIGHTS NOTICE: For units of the Department of
Defense, all documentation and manuals were developed at
private expense and no part of it was developed using
Government Funds. The restrictions governing the use and
disclosure of technical data marked with this legend are set
forth in the definition of "limited rights" in paragraph (a) (15)
of the clause of DFARS 252.227.7013. Unpublished - rights
reserved under the Copyright Laws of the United States.
Defense, all documentation and manuals were developed at
private expense and no part of it was developed using
Government Funds. The restrictions governing the use and
disclosure of technical data marked with this legend are set
forth in the definition of "limited rights" in paragraph (a) (15)
of the clause of DFARS 252.227.7013. Unpublished - rights
reserved under the Copyright Laws of the United States.