Tyco Safety Products/Sensormatic IDRDR2 Manuel D’Utilisation

AGILE2 READER 

8200-0222-08, REV. A 

INSTALLATION AND SERVICE GUIDE 

12 of 13

 

Although the browser-based interface pages are 
displayed in red when operating in Safe mode, the 
reader is fully functional. In most cases, the reader 
will need to be reconfigured for operation with the 
reader application after starting in Safe mode. 

1.  Disconnect power from the reader. 

2.  Press and hold the Safe Mode button while 

restoring power to the reader. Keep the Safe 
Mode button pressed until the reader boots 
completely (the green Power/Heartbeat LED 
blinks). 

 

 

3.  Factory-default settings are restored. 

4.  Use the browser-based interface to configure 

the reader for use with your system. 

This PC must be configured with an IP address 
and subnet mask compatible with the reader 
default settings. For example: IP address 
10.0.0.10, net mask 255.0.0.0. 

 

5. Click the Settings link on the navigation menu 

and verify the new settings. 

6.  Restart the reader with the new settings. Once 

the restart is complete, the reader is no longer 
in Safe Mode. 

UHF operating frequency....................902–928MHz 
Input voltage ........................................ 24Vdc, 3.0A 

Input voltage ..........Nominal 100–240Vac, 50/60Hz 
Ac line current .......................Nominal 0.5A at 120V 
Output voltage............... Nominal 24Vdc, 2.5A peak 
 

Certified limited power source 

 Class 

2 

Operating temperature:....0° to 40°C (32° to 104°F) 
Relative humidity:............ 0 to 90% non-condensing 

Length .............................................26.5cm (10.4in) 
Width...............................................26.6cm (10.4in) 
Width (with mounting bracket) ...........30.5cm (12in) 
Depth ..................................................3.8cm (1.5in) 
Weight.................................................. 1.4kg (3 lbs) 

Length .........................................64.13cm (25.25in) 
Width.............................................31.03cm (12.2in) 
Depth ................................................4.32cm (1.7in) 
Weight............................................. 1.6kg (3.45 lbs) 

Length .........................................73.03cm (28.75in) 
Width.............................................31.03cm (12.2in) 
Depth ................................................4.32cm (1.7in) 
Weight............................................... 1.8kg (3.9 lbs) 

Length ................................................31cm (12.2in) 
Width..................................................31cm (12.2in) 
Depth ..................................................5.3cm (2.1in) 
Weight............................................... 0.7kg (1.6 lbs) 

915 MHz...............................................EPC Class 1 
 

EPC Class 0 

 ISO 

18000-6B