DBTEL DB-2901 Manuel D’Utilisation
Call Functions
16
Call Functions
Turning your phone ON and OFF
Press and hold
for 3 seconds and then
release it.
! Always switch off your phone whenever it is
! Always switch off your phone whenever it is
forbidden to use it or when it may cause
interference or danger.
interference or danger.
When PIN is requested
UIM cards are usually protected with a PIN code.
The PIN code usually comes with your UIM card,
provided by the network operator.
1. Key in your PIN code (note that the characters in
The PIN code usually comes with your UIM card,
provided by the network operator.
1. Key in your PIN code (note that the characters in
your password are replaced with “
*
”).
2. After you have entered the PIN code, press
(OK).
3. If you key in a wrong number, press
(Clear)
to remove the last digit. Press and hold
to
clear the entire entry.
4. If the PIN code entered is incorrect, a warning
message will be displayed to inform you of the
remaining attempt to enter your PIN.
remaining attempt to enter your PIN.
! If an incorrect PIN code is entered 3 times in
succession, your phone will automatically lock-up
the UIM card and a message will be displayed to
inform you that the UIM card is blocked.
the UIM card and a message will be displayed to
inform you that the UIM card is blocked.
Unlock the blocked UIM card
If your UIM card is locked, you will be asked to enter
the PUK code to unlock your phone in order to
continue using it.
! The unblock code consists of 8 digits, and is
the PUK code to unlock your phone in order to
continue using it.
! The unblock code consists of 8 digits, and is
provided with the UIM Card. If not, please check
with your network service provider for the code.
with your network service provider for the code.
Making calls
1. In idle mode, key in the area code and phone
number. Press
(Delete) to delete the last
digit. Press and hold
for 3 seconds to clear
the whole number.
2. Press
to dial the number.
3. Press
to end an active call or stop dialing.
! A “beep” will be heard to inform you that the call is
connected.
yExample:
For domestic calls, when in idle mode, key in
54422299 and press
54422299 and press
to make the phone call.
International calls
1. The prefix for international calls is as follows:
a) Key in 00 followed by the country code, area
code and phone number.
b) Press and hold
until a “+” sign appears,
then key in the country code, area code and
phone number accordingly when you are in idle
mode.
phone number accordingly when you are in idle
mode.
2. Press
to place the call.
3. Press
to end an active call or stop dialing.
yExample
:
For international calls, when you are in idle mode,
key in ＋862154422999 and press
key in ＋862154422999 and press
to make
the phone call.
Making calls via the phone book
1. Press
(Menu) to access the main menus,
scroll to “Phone Book” with
and press
(OK).