McIntosh Laboratory Inc MCAIRE001 Manuel D’Utilisation

Page de 9
17
a label usually located on the Router. If you 
assigned a unique name to indentify the 
Router, please select that name instead of 
the MAC Address.
9. Touch the Done button On-Screen to accept the 
desired Router. Refer to figure 16.
How to Setup the McAire for AirPlay and a Network, con’t
Figure 12
Figure 11
Method Number 2
Unlike Setup Method #1, this method uses the McAire 
(instead of a computer) to establish communications 
with a Wireless Router using your Apple Mobile De-
vice. After setup up is completed, a Wireless Router 
will still be needed to stream music from your Apple 
Mobile Device to the McAire via AirPlay. Perform the 
following setup steps:
1. Switch power On to Router and after it has booted 
up, then switch power On to the Computer and 
McAire.
Note: If the McAire had been previously setup and/
or been in use for some time, it is important 
to first reset the McAire to factory default 
settings before proceeding. Refer to page 21 
on how to reset the McAire.
2. Using the INPUT Control on the Front Panel of 
the McAire, select the NET (Network) Input on 
the McAire.
Note: It is normal for the NET indicating LED to 
change from magenta in color to an alter-
nating flashing green color during the time 
a network connection is trying to be estab-
lished.
3. Activate the Apple Mobile Device and select the 
Settings Icon. Refer to figure 7 on page 16.
4. From the Settings Menu select the Wi-Fi Icon. 
Refer to figures 8 and 9 on page 16.
5. After about 60 seconds the Apple Mobile Device 
Wi-Fi Networks 
Menu will indicate 
“McAire_Setup_7...”. 
Refer to figure 13.
6. Referring to figure 
7 launch the Safari 
WEB Browser and 
type in on the ad-
dress line the follow-
ing:
 
http://mcaire- _ _ _ 
                       _ _ _.local/
Note: This McAire 
is identified 
by the MAC 
Address 
(unique number for each McAire) and is 
located on the Rear Panel of the McAire. 
Insert the MAC Address of this unit into 
the address line above where the six blank 
spaces are.
7. Touch the “Enter Key” on the On-Screen key-
board. After several minutes the McIntosh 
McAire Setup Screen will appear in the web 
browser window. Refer to figure 14.
8. Referring to figure 14, from the choices appear-
ing in the SSID pull down window select “Your 
Router” (MAC Address). Refer to figures 15 and 
16.
Note: The Router is identified by the MAC Address 
(unique number for each Router) and is on 
Figure 13
Figure 14
Figure 15
Figure 16