TRX Systems Inc. NNT5375-1000 Manuel D’Utilisation
TRX Systems Inc.
Document Version 1.3
Neon™ Indoor Location System User’s Manual
3 October 2012
TRX Systems Proprietary
© 2012 TRX Systems, Inc.
13
Figure 7. Neon Visualizer on-screen controls
The on-screen navigation controls are located in the top right corner of the visualizer window. The
center button of the on-screen controls is used to switch between 2D and 3D modes of operation. The
available navigation controls change depending on whether the visualizer is in 2D or 3D mode.
center button of the on-screen controls is used to switch between 2D and 3D modes of operation. The
available navigation controls change depending on whether the visualizer is in 2D or 3D mode.
Table 1. Visualizer Navigation Controls in 2D Mode.
On-screen Control
Mouse Control
Pan
Four directional buttons
Left mouse button drag
Zoom
Zoom in and out buttons
Mouse scroll-wheel
Rotate
Rotate left and right buttons
N/A
Table 2. Visualizer Navigation Controls in 3D Mode.
On-screen Control
Mouse Control
Pan
Four directional buttons
Left mouse button drag
Zoom
Zoom in and out buttons
Mouse scroll-wheel
Rotate
Rotate left and right buttons
Right mouse button drag left and right
Tilt
Tilt up and down buttons
Right mouse button drag up and down
Elevation Elevation up and down buttons
N/A
5.2.1.2 Looking inside of buildings
Figure 8. The Elevation sidebar window is used in conjunction with the visualizer.
The Neon GIS Visualizer displays the location of persons inside of buildings in three-dimensions. A
building must be modeled before it can be shown in the visualizer.
building must be modeled before it can be shown in the visualizer.
The elevation window expandable from the right sidebar is used as a floor selector when viewing the
interior of buildings. By default, buildings are represented as grey polygons overlaid on top of the base
interior of buildings. By default, buildings are represented as grey polygons overlaid on top of the base