TRX Systems Inc. NNT5375-1000 Manuel D’Utilisation
TRX Systems Inc.
Document Version 1.3
Neon™ Indoor Location System User’s Manual
3 October 2012
TRX Systems Proprietary
© 2012 TRX Systems, Inc.
26
7 Neon Communications Options
Each Neon Tracking Unit is paired with a portable, personal computing device to support transmission of
location and sensor information from the Tracking Unit to the Command Software. The Command
Station Computer must be configured appropriately to receive the data, as described in the following
subsections.
location and sensor information from the Tracking Unit to the Command Software. The Command
Station Computer must be configured appropriately to receive the data, as described in the following
subsections.
7.1 Motorola APX
The Neon™ Indoor Location System is designed to work with Motorola APX portable radios operating in
conventional mode. Motorola APX Radios are capable of providing data communications between the
TRX Systems Tracking Unit and the Command Software. In this configuration, an APX radio is carried by
each tracked person, and a single gateway radio is connected into the Command Station computer.
conventional mode. Motorola APX Radios are capable of providing data communications between the
TRX Systems Tracking Unit and the Command Software. In this configuration, an APX radio is carried by
each tracked person, and a single gateway radio is connected into the Command Station computer.
Each tracked person pairs their Motorola APX radio and TRX Systems tracking unit using Bluetooth. An
APX radio is connected to the Command Station using a GCAI-to-USB cable. When properly configured,
a Tracking Unit will automatically report location sensor data to the command station using the radio
network. Ensure that your Motorola APX radios are equipped with the correct options and programmed
with the correct frequencies for your deployment.
APX radio is connected to the Command Station using a GCAI-to-USB cable. When properly configured,
a Tracking Unit will automatically report location sensor data to the command station using the radio
network. Ensure that your Motorola APX radios are equipped with the correct options and programmed
with the correct frequencies for your deployment.
Motorola APX Requirements
IV&D (packet data) - Q947
Bluetooth - QA00583
7.1.1 Connecting an APX Radio to the Command Station
Connect the APX gateway radio to the command station computer using a GCAI-to-USB cable then turn
the APX gateway radio on.
the APX gateway radio on.