TRX Systems Inc. NNT5375-1000 Manuel D’Utilisation
TRX Systems Inc.
Document Version 1.3
Neon™ Indoor Location System User’s Manual
3 October 2012
TRX Systems Proprietary
© 2012 TRX Systems, Inc.
29
Figure 35. Connection status indicators on the Tracking Unit and APX portable radio.
7.1.3 Connecting to a Neon Session
To connect to a Neon Session, start Neon Command Station Software. Ensure that an APX radio is
connected to the command station and turned on. Each tracked person should: (1) attach a Tracking
Unit securely around their waist with the TRX Systems logo facing outwards; (2) turn on the paired APX
portable radio; (3) turn on their Tracking Unit.
connected to the command station and turned on. Each tracked person should: (1) attach a Tracking
Unit securely around their waist with the TRX Systems logo facing outwards; (2) turn on the paired APX
portable radio; (3) turn on their Tracking Unit.
7.2 Cellular or Wi-Fi (via an Android-based mobile handset)
When cellular or Wi-Fi connectivity is used, the Neon Mobile Application provides the interface to the
Tracking Unit via Bluetooth pairing. Configuration of the Tracking Unit-Neon Mobile pairing is described
in Section 8 of this document.
Tracking Unit via Bluetooth pairing. Configuration of the Tracking Unit-Neon Mobile pairing is described
in Section 8 of this document.
In this configuration, the Command Station interfaces to either a cellular data network (e.g., through a
mobile data card with a static, public IP address) or interfaces to a Wi-Fi data network (again, with a
static address). This static address must be programmed into the Android application. If a dynamic
address is used (e.g., in a test configuration), the dynamic address must be programmed into Neon
mobile each time it changes (which may happen when the Command Software application is restarted).
mobile data card with a static, public IP address) or interfaces to a Wi-Fi data network (again, with a
static address). This static address must be programmed into the Android application. If a dynamic
address is used (e.g., in a test configuration), the dynamic address must be programmed into Neon
mobile each time it changes (which may happen when the Command Software application is restarted).