HM Electronics Inc XCVR2G4A Manuel D’Utilisation
User Guide | FreeSpeak II™
Page 100
•
Display brightness level
•
Display dim timeout
•
Display off timeout
8.5.1
Setting the display and LED brightness
Use this setting to control the brightness of the display. The beltpack
automatically dims after a timeout period if no key is used or there is no incoming
call or call alert. You can adjust the timeout period.
automatically dims after a timeout period if no key is used or there is no incoming
call or call alert. You can adjust the timeout period.
When the beltpack is dimmed, the display goes off after a timeout period if no key
is used or there is no incoming call or call alert. You can adjust the timeout
period.
is used or there is no incoming call or call alert. You can adjust the timeout
period.
1)
To enter the beltpack menu, press and hold the Menu key.
2)
Use the rotary and Menu Select keys to select Settings > Display
Options > Brightness Level
Options > Brightness Level
3)
Use either rotary control to select the dim level between 1 and 5 (default).
4)
To confirm the selection and exit the menu screen, press the Menu
Select key.
Select key.
8.5.2
Setting the display dim timeout
Use this setting to determine when the beltpack display will dim if no key is used
or there is no incoming call or call alert.
or there is no incoming call or call alert.
1)
To enter the beltpack menu, press and hold the Menu key.
2)
Use the rotary and Menu Select keys to select Settings > Display
Options > Dim Timeout
Options > Dim Timeout
3)
Use either rotary control to select the dim level between Off and 120
seconds (default).
seconds (default).
Note:
Setting the dim timeout to Off disables the timeout function.
4)
To confirm the selection and exit the menu screen, press the Menu
Select key.
Select key.
8.5.3
Setting the display off timeout
Use this setting to determine when a dimmed beltpack display will switch off.