HM Electronics Inc XCVR2G4A Manuel D’Utilisation
User Guide | FreeSpeak II™
Page 126
10.4
Configuring beltpacks
From the Configuration Editor, you can use the Beltpacks tab to:
•
Register beltpacks with the Base station
•
Edit key assignments
•
Change input and output levels.
10.4.1
Selecting the beltpack to register or edit
1)
From the Name list, select a beltpack slot.
The Name list contains all the beltpacks and their serial numbers.
2)
In the Name field, enter an ID for the beltpack. Enter a maximum of five
characters.
characters.
Note:
You can also use the Next and Previous buttons between the
Name and Serial Num fields to step through the beltpacks.
Name and Serial Num fields to step through the beltpacks.
3)
In the Serial Num field, enter the serial number of the beltpack. The
beltpack serial number is a four digit number on a label on the back of the
beltpack.
beltpack serial number is a four digit number on a label on the back of the
beltpack.
Figure 10-7 Beltpack Label
10.4.2
Registering beltpacks using the micro USB cable
When beltpacks are first registered with a Base station they must be paired with
the Base station using the procedure below. You can now edit the beltpacks using
the Configuration Editor or the Base station front panel menus.
the Base station using the procedure below. You can now edit the beltpacks using
the Configuration Editor or the Base station front panel menus.
1)
First load or retrieve a configuration file. See 10.1 Loading
configurations.
configurations.
2)
Connect the beltpack to the PC using the standard beltpack micro USB
cable and power it on.
cable and power it on.