HM Electronics Inc XCVR2G4A Manuel D’Utilisation
User Guide | FreeSpeak II™
Page 137
•
RTS - selects RTS compatibility with termination enabled.
•
OFF - termination disabled on partyline port.
The selection affects the gain, termination and call signaling used when
communicating with this port.
communicating with this port.
Figure 10-12 Partyline Port Type Menu
10.5.4
Selecting a communication path for the port
For headset, partyline, 4-wire ports and IFBs, you can select an audio path to
determine the destination for the port. To do so:
determine the destination for the port. To do so:
1)
From the Cross Point Assignment left list, select the audio destination for
the port.
the port.
For a front panel headset port, you can specify the port which is called
when the Talk button for that port is pushed.
when the Talk button for that port is pushed.
For a partyline or 4-wire port, it causes a permanent talk path to be
created from the port to this destination.
created from the port to this destination.
For an IFB it creates an IFB from the port to the destination.