HM Electronics Inc XCVR2G4A Manuel D’Utilisation
User Guide | FreeSpeak II™
Page 142
10.7
Reducing antenna interference
From the Configuration Editor, you can use the Antennas tab to reduce
interference between antennas that are close to each other.
interference between antennas that are close to each other.
Because of propagation delays along the cables, antennas which are in close
proximity but which have effective cable lengths which differ by more than
approximately 150m can interfere with each other. This screen allows you to
compensate for the length of the connection of each of the 10 available antennas.
proximity but which have effective cable lengths which differ by more than
approximately 150m can interfere with each other. This screen allows you to
compensate for the length of the connection of each of the 10 available antennas.
Figure 10-17 Antennas Tab
1)
From each Antenna list, select the appropriate cable length.
Figure 10-18 Antenna Cable Length Setup
2)
Download the changes to the Base station with reset.
10.8
Configuring IFBs
From the Configuration Editor, you can use the IFB tab to:
•
Assign IFB sources and destination to an IFB label
•
Set the dim level for the IFB