HM Electronics Inc XCVR2G4A Manuel D’Utilisation
User Guide | FreeSpeak II™
Page 66
6.10
Setting the beltpack audio level
1)
From the MAIN menu, select BELTPACKS.
The AVAILABLE BELTPACKS screen is displayed (Figure 6-2 Available beltpacks
menu).
menu).
2)
Select the beltpack for which audio levels are to be set. The BELTPACK
menu is displayed.
menu is displayed.
3)
Select ‘LEVELS’. The beltpack levels editing menu is displayed, as shown
in Figure 6-20 Beltpack levels menu.
in Figure 6-20 Beltpack levels menu.
Figure 6-20 Beltpack levels menu
4)
Use the setup/enter encoder to select the input level to display the
beltpack input level setup.
beltpack input level setup.
Figure 6-21 Beltpack Input level setup
5)
Use the setup/enter encoder to set the beltpack input level in the range -
20dB to +6dB by rotating it anticlockwise to reduce the level and
clockwise to increase the level. Press the setup/enter encoder to select the
input level.
20dB to +6dB by rotating it anticlockwise to reduce the level and
clockwise to increase the level. Press the setup/enter encoder to select the
input level.
6)
Use the setup/enter encoder to select the output level to display the
beltpack output level setup.
beltpack output level setup.
Figure 6-22 Beltpack output level setup
7)
Use the setup/enter encoder to set the beltpack output level in the range -
20dB to +6dB by rotating it anticlockwise to reduce the level and
20dB to +6dB by rotating it anticlockwise to reduce the level and