HM Electronics Inc XCVR2G4A Manuel D’Utilisation
User Guide | FreeSpeak II™
Page 77
From the MAIN menu, select SYSTEM. The SYSTEM menu appears as shown in
Figure 6-49 System menu 1.
Figure 6-49 System menu 1.
Figure 6-49 System menu 1
Rotate the setup/enter encoder clockwise to scroll through the list and display
further options.
further options.
Figure 6-50 System menu 2
Figure 6-51 System menu 3
The following sections describe the items on this menu.
6.17
System Info
When Info is selected the screen displays the system’s current firmware version,
system ID (for registering beltpacks), and if applicable, IP address.
system ID (for registering beltpacks), and if applicable, IP address.
Figure 6-52 System info menu
To return to the SYSTEM menu, press the setup/enter button.
6.18
Restoring the Defaults
When F.DEFAULT is selected the factory default map is loaded into memory, the
IP address is set to 172.30.3.100 and the IP mask is set to 255.255.0.0
IP address is set to 172.30.3.100 and the IP mask is set to 255.255.0.0
Note:
The F.DEFAULT feature will only work on Base stations that have been upgraded
by Clear-Com or a qualified Clear-Com representative.
by Clear-Com or a qualified Clear-Com representative.