HM Electronics Inc XCVR2G4A Manuel D’Utilisation
User Guide | FreeSpeak II™
Page 96
•
The volume of the line-in feed.
8.2.1
Configuring the beltpack channel volumes and master
volume
volume
Each of the four beltpack channel volume levels is configurable separately.
Note:
You can only change volume levels on keys that have been configured.
To configure a channel volume:
1)
To enter the beltpack menu, press and hold the Menu key.
2)
Turn either rotary control clockwise to highlight Vol Level Ctrl, and press
the Menu Select key (D). The Volume Level Control screen appears:
the Menu Select key (D). The Volume Level Control screen appears:
3)
Use the left-hand rotary control to select the required channel, or select M
for the master volume
for the master volume
4)
Use the right-hand rotary control to adjust the volume level. The default is
0dB for channel audio, and -9.6dB for master volume.
0dB for channel audio, and -9.6dB for master volume.
Note:
The volume level appears in the footer.
5)
To confirm the selection, press the Menu Select key (D).
8.2.2
Configuring the volume level of the line input
You can configure the volume of an audio line input:
1)
To enter the beltpack menu, press and hold the Menu key.
2)
Turn either rotary control clockwise to highlight Line In Vol Lvl, and
press the Menu Select key (D).
press the Menu Select key (D).
3)
Use either rotary control to select between -15 dB to 6dB
4)
To confirm the selection and exit the menu screen, press the Menu
Select key (D).
Select key (D).
8.2.3
Configuring the rotary controls
You can configure the rotary controls on the beltpack to either: