Fujitsu CFBIPAD Manuel D’Utilisation
iPAD Operations Guide
Copyright 2003 by Fujitsu Transaction Solutions Inc.
Confidential
38
7
Magnetic Card Reader
(1) After making sure of the orientation (magnetic stripe faces top of iPAD), insert a magnetic
card.
(2) Slowly move the magnetic card from left to right.
Note
• A magnetic card will not be read
correctly if movement stops part
way, the speed of movement
changes, or the card is not moved
parallel with the slot.
way, the speed of movement
changes, or the card is not moved
parallel with the slot.
• The LED can be made to light by
an application when a magnetic
card is read correctly.
card is read correctly.
Cleaning the magnetic card reader
The magnetic card reader becomes contaminated with dirt and dust from use. Clean the
reader using the cleaning card supplied as an accessory.
The magnetic card reader becomes contaminated with dirt and dust from use. Clean the
reader using the cleaning card supplied as an accessory.
• Cleaning cycle: Clean the reader every month or whenever errors are frequent.
• Cleaning method: Insert the cleaning card (supplied) in the reader with the rough side
• Cleaning method: Insert the cleaning card (supplied) in the reader with the rough side
(cleaning side) facing up. (Insertion is the same as for a magnetic card.)
• Replacement cycle: Replace the cleaning card (supplied at a cost) when it becomes
contaminated.
If errors still occur after the reader has been cleaned, notify your Fujitsu maintenance
representative.
representative.
CAUTION
• Before cleaning the reader, turn off
the iPAD to guard against a possible
malfunction.
malfunction.