Tait International Limited TBCH1A Manuel D’Utilisation
10
Description
TB9400 Installation and Operation Manual
© Tait Limited April 2014
1.1
Features
The following are some of the features of the base station:
■
Fully compliant with the Project 25 Common Air Interface. Can
therefore interoperate with any similarly compliant radios.
therefore interoperate with any similarly compliant radios.
■
Linear power amplifier allows operation with Linear Simulcast
Modulation (LSM). Future software upgrades will also allow
P25 Phase 2 operation (H-DQPSK modulation).
Modulation (LSM). Future software upgrades will also allow
P25 Phase 2 operation (H-DQPSK modulation).
■
Integrated built-in voting facility. No external voter is needed.
■
Can be completely managed remotely from a PC running a web
browser: configuration, alarm monitoring, fault diagnosis, feature and
firmware upgrades. Alarms can also be reported via SNMP traps,
allowing integration with an SNMP-based network management
system.
browser: configuration, alarm monitoring, fault diagnosis, feature and
firmware upgrades. Alarms can also be reported via SNMP traps,
allowing integration with an SNMP-based network management
system.
■
An integrated wiring solution is provided for the system control bus and
DC power connections to each module in the subrack.
DC power connections to each module in the subrack.
■
Reciters (receiver/exciter modules) can be replaced without affecting
the operation of other reciters in the same subrack.
the operation of other reciters in the same subrack.
■
Rugged construction with generous heatsinks and fan-forced cooling
for continuous operation from –30°C to +60°C (–22°F to +140°F).
for continuous operation from –30°C to +60°C (–22°F to +140°F).