Digital Monitoring Products Inc PC0086 Manuel D’Utilisation

The DMP 7000 Series Thinline LCD Keypads offer the same flexible features and functionality as current DMP keypads 

in a stylish, sleek new design.  Each keypad provides four 2-button Panic keys, an AC power LED, an Armed LED, 

32-character display, backlit logo and keyboard with easy-to-read lettering and an internal speaker.  The 7070 and 

7075 keypads provide four fully programmable Class B, Style A protection zones you can program for a variety of 

burglary, fire, and access control applications.  The 7064 and 7075 keypads provide a built-in proximity card reader 

specifically designed to accept DMP 1400 Series proximity credentials.  The Model 7075 also allows connection of any 

Weigand output reader.

The keypad housing is designed to easily install on any 4” square box, 3-gang switch box, 

695 and 696 backbox, or flat surface.  Figure 1 shows the keypad housing mounting hole 

locations.

The keypad housing is made up of two parts: the front, which contains the circuit board, 

keyboard components, and the base.  To mount the keypad, remove the base from the 

front by inserting a flat screwdriver into one of the openings on the bottom.  Twist the 

screwdriver while pulling the halves apart.  Repeat with the other opening.

Figure 1 shows wiring harness assignments.  Observe wire colors when connecting the red, yellow, green, and black 

wires to the keypad bus.  When wiring directly to the panel terminals, connect red to panel terminal 7, yellow to 

terminal 8, green to 9, and black to panel terminal 10.  Use 1k Ohm EOL resistors, DMP Model 311, on keypad zones 

1 through 4. 
The 7060 and 7064 keypads are supplied with a 4-wire harness for panel keypad bus connection.  
The 7070 and 7075 keypads are supplied with a 12-wire data bus/zone harness.  Four wires connect to the keypad 

bus, the same way the 7060 and 7064 keypad harness connects.  The remaining eight wires are for the four zone 

inputs: two wires for each zone.  
The 7075 keypad is also supplied with one 5-wire output/reader harness.

Surface and Backbox

Mounting Holes

Combined 4-square

and 3-gang switch box

Mounting Holes

Surface and Backbox

Mounting Holes

1K EOL

1K EOL

1K EOL

1K EOL

Green/White – Connect Reader Data 0

White – Connect Reader Data 1

Orange – Door Strike Normally Open

Gray – Door Strike Common

Violet – Door Strike Normally Closed

Black –  Ground 

Green – Receive Data

Yellow – Send Data 

Red – Keypad Power 

– Zone 4

– Zone 3

– Zone 2

– Zone 1

Output Reader

7075 Keypad

Zones 1 through 4

7070 and 7075 

Keypads

All Keypads