Digital Monitoring Products Inc PC0181 Manuel D’Utilisation
XTLplus Installation and Programming Guide
Digital Monitoring Products
13
INITIALIZATION
Initialization
20.1 Initialization
This function allows you to set the panel’s programmed memory back to the
factory defaults in preparation for system programming.
After you select YES to clear a section of memory, the panel asks if you are sure
After you select YES to clear a section of memory, the panel asks if you are sure
you want to clear the memory. This is a safeguard against accidently erasing part
of your programming. No memory is cleared from the programming until you
answer YES to the SURE? YES NO option.
CODES?
NO
YES
SCHEDS?
NO
YES
For each section of the panel program you
can initialize, a NO or YES option is provided.
Selecting YES advances you to
a confirmation prompt.
If you select YES, the panel initializes that section of
the program and advances you to the next prompt.
If you select NO, the panel advances you to the next
If you select NO, the panel advances you to the next
section prompt but does not initialize that section of
the program.
SURE?
YES
NO
Selecting NO advances
you to the next prompt.
20.2
Clear All Codes
NO - leaves existing user codes intact.
YES - clears the user code memory and assigns the user code number 99 to user 99
YES - clears the user code memory and assigns the user code number 99 to user 99
on the XTLplus.
20.3
Clear All Schedules
NO - Leaves existing schedules intact.
YES - Clears all schedules from the XTLplus programming.
YES - Clears all schedules from the XTLplus programming.
20.4
Clear Events
NO - leaves existing event memory intact.
YES - clears all event memory currently held in the panel’s Display Events buffer.
YES - clears all event memory currently held in the panel’s Display Events buffer.
20.5
Clear Zone Programming
NO - leaves existing zone information intact.
YES - sets all zones in the system to * UNUSED *.
YES - sets all zones in the system to * UNUSED *.
20.6
Clear Communication
NO - Leaves existing communication and messaging programming intact.
YES - Resets communication and messaging programming to factory defaults.
YES - Resets communication and messaging programming to factory defaults.
20.7
Clear Wi-Fi
NO - Leaves existing Wi-Fi programming intact.
YES - Resets Wi-Fi programming to factory defaults.
YES - Resets Wi-Fi programming to factory defaults.
20.8
Set to Factory Defaults
NO - leaves the remainder of the existing panel programming intact.
YES - sets the panel’s programming back to factory default selections and clears all
YES - sets the panel’s programming back to factory default selections and clears all
Z-Wave device programming and Favorites from the panel. Selecting YES does not
clear the panel’s event memory, zones, user code information, or schedules.
INITIALIZATION
CODES?
NO YES
SURE?
YES
NO
SCHEDS? NO YES
SURE?
SURE?
YES
NO
EVENTS? NO YES
SURE?
SURE?
YES
NO
ZONES?
NO YES
SURE?
YES
NO
COMM?
NO YES
SURE?
YES
NO
CLEAR WIFI NO YES
SURE? YES NO
SURE? YES NO
DEFAULTS? NO YES
SURE?
SURE?
YES
NO