Quantum Instruments FW10 Manuel D’Utilisation

Page de 7
FW-10 Instructions and Housing Label
Revised: 
06 June 2000
ADVANCE COPY OF INSTRUCTIONS
PROPRIETARY TO QUANTUM INSTRUMENTS INC.  DO NOT COPY.  SHRED.
1.0  Introduction
We would like to introduce you to Delta’s unique ability to control your photo gear, wirelessly.
Delta makes a  two-way link between your camera, flash, and you.  Let’s say you’re using the Delta system
for wireless flash sync.   The remote Delta unit will send back confirmation that it received the trigger
signal!
Delta provides wireless sync and/or wireless shutter control.  And, Delta provides wireless TTL control of
remote Qflash’s.
Delta controls four independent Zones for wireless flash or motor drive.  You can activate any one Zone, or
any combination of Zones 1,2,3 and 4.   There are 15 possible Zone combinations, plus one that shuts off
all Zones.  Switch your lighting instantly, remotely.  Shoot cameras, or combinations of them, from your
remote position.
Delta also has eight unique System codes.  Delta units set to one System cannot activate Deltas set to
different Systems.  You control the System code to make Delta units work together or independently, as
required.
Each Delta can be selected to send, receive, or relay commands to your equipment..  For example, four
Deltas can become two remote send/receive Systems, or they can become one System with one sender and
three receivers.  If you need extremely long-range wireless control, Deltas can relay commands to farther
Delta units.  You need only one type of Delta and fewer of them than with conventional wireless triggers.
Delta is very small and light and mounts easily to cameras, brackets, poles, and tripod legs.  Adapter cords
are available for all popular cameras and flashes.  A Universal Module (Uni-Mod), though not required,
allows you to hot sync Delta directly from camera hot shoes .
There are many more useful features of Delta and we encourage you to read on!