Quantum Instruments FW9T Manuel D’Utilisation

Instructions    

 

 

 

 

 

We introduce you to the newest additions to the FreeXwire system:  Receiver FW8R and Transmitter FW9T.   
 
Transmitter FW9T emits higher power for extended range.  Receiver FW8R has extra sensitivity and simplified operation. 
 
Both FW8R and FW9T are fully compatible with all FreeXwire system components including Receiver FW7Q and Transceiver 
FW10. 
 
FreeXwires provide wireless sync for remote flash and/or wireless shutter control for remote camera operation.  FW8R and 
FW9T can provide wireless TTL flash control from digital and film cameras to Qflash T5d (Qflash 4d models can be upgraded).  
This wireless TTL feature also transmits the “pre-flash” signal for digital cameras. 
 
FreeXwire controls four independent 

Zones

 for wireless flash or motor drive.  You can activate any one Zone, or any combination 

of Zones 1,2,3 and 4.  Switch your lighting instantly, remotely.  Select and trigger flash, cameras, or combinations of them, from 
your remote position. 
 
FreeXWire also has eight unique 

Channel Codes

. FreeXwire units set to one Channel cannot activate FreeXwires set to different 

Channels.  You control the Channel Code to make FreeXwire units work together or independently, as required. 
 
FreeXWire is very small and light and mounts easily to cameras, brackets, poles, and tripod legs.  Sync and motor drive cords are 
available for popular cameras and flashes.  You can mount Transmitter FW9T directly on camera hot shows using optional 
UniMod FW11 or Hot Shoe Adapter FW12.