Honeywell International Inc. 8DLLYNXREN-5 Manuel D’Utilisation
–34–
✻
81 Zone List Menu Mode
While in Program mode, press
✻
81 to enter Zone List Menu Mode. This mode is used to program zone
lists for output devices (programmed in
✻
80 menu mode) or Chime-by-Zone in Zone List 3.
NOTES:
• Any list may include any or all of the systems zone numbers.
• A zone list can be assigned to more than one Powerline Carrier Device.
• A zone list can be assigned to more than one Powerline Carrier Device.
The prompts for *81 are as follows:
81
Zone List Programming ---------------Main Menu prompt
A 01
Zone List Number-----------------------for entering the zone list number to be programmed
b
Zone Entry to List ----------------------for entering zones to the assigned zone list
C
Delete Entire List? ---------------------for deleting the entire zone list and its contents
d
Delete Specific Zones From List?---Selects whether to delete zones or return to next zone list number
E
Delete Zones ------------------------------for deleting specific zones from the current zone list
The following explains these prompts in detail. The left two columns identify the prompts and list the
available entries. The right-most column provides a further explanation of the entries.
available entries. The right-most column provides a further explanation of the entries.
Notes: (1) Entering a number other than one specified will give unpredictable results.
(2) Do not assign zones with zone types 20, 21 or 22 to a zone list.
(3)
Zone List 2 should be used for Cross Zoning. When creating zone list 2 for cross zoning, include only 2 zones assigned to
zone types 3, 4, or 5. If interior zones (zone type 4) are cross zoned, then both zones in zone list 2 must be interior zones. Do
not cross zone more than 2 zones, or zone types that have delays (entry/exit zones, interior w/delay), or 24-hour zones, as
these choices may produce unpredictable operation and may not function as intended. If cross zoning is used, zone list 2
should not be used for other purposes, such as triggering powerline carrier devices. If field ✻39 has been set to “0” (no cross
zoning), then Zone List 2 can be used for other purposes.
8I
Zone list programming
0 = exit mode
1 = enter mode
Pressing 1 advances to the next prompt below.
Pressing 0 exits mode, upon which this prompt blinks, indicating the mode
is inactive.
Pressing 0 exits mode, upon which this prompt blinks, indicating the mode
is inactive.
A
0I
Zone list number
01-03 = zone list number to be programmed
00 = exit Zone List mode
[✻] = continue
Enter the Zone List Number 01, 02, or 03 to program (or 00 if no zone lists
are used).
are used).
b
zz
Zone entry to list
01-41, 95, 96, 99 = zone numbers to add to
zone list
[✻] = accept zone number and enter the next
zone number
00 = accept zone number(s) and continue to
next prompt
Enter each zone number to add to the zone list by first entering the zone
number, then the [
number, then the [
✻
] key (for example, 01
✻
02
✻
03
✻
). The system will
announce the Voice Descriptor for the selected zone, if it is programmed.
After all desired zones are enrolled, enter “00” to advance.
After all desired zones are enrolled, enter “00” to advance.
C
Delete entire zone list?
0 = don’t delete; continue to next prompt
1 = delete the current zone list
To delete the zone list, enter “1”. All zones in the zone list will be deleted
automatically and programming will return to the ZONE LIST NUMBER
prompt.
automatically and programming will return to the ZONE LIST NUMBER
prompt.
To save the zone list or delete specific zones from the list, enter “0”.
d
Delete zones from list?
1 = continue to delete zones prompt
0 = don’t delete; continue to next zone list
number prompt (A….01)
[#] = return to zone list number prompt
(A….01)
To save the entire zone list, enter “0” and programming will return to the
ZONE LIST NUMBER prompt.
To delete a zone or zones in a zone list enter “1”.
ZONE LIST NUMBER prompt.
To delete a zone or zones in a zone list enter “1”.
E
Delete zones
Enter each 2-digit zone number to be deleted
from the current zone list, followed by the [✻]
key.
[✻] = delete zone and enter next zone to be
deleted
00 = delete zone and return to next zone list
number prompt (A….01) desired
When deleting a zone(s) from the zone list, if the selected zone has a Voice
Descriptor programmed, upon deletion it will be announced as a
confirmation that it has been deleted. After all zones to be deleted are
entered, enter “00” to return to the ZONE LIST NUMBER prompt so that
another list can be programmed, if desired.
Descriptor programmed, upon deletion it will be announced as a
confirmation that it has been deleted. After all zones to be deleted are
entered, enter “00” to return to the ZONE LIST NUMBER prompt so that
another list can be programmed, if desired.