Nikon Corporation 1150EB Manuel D’Utilisation

F

T

ec
hni
cal
 No

tes an

d

 In

d

ex

Camera turns off without 
warning.

• The camera automatically turns off to save power 

(auto off function).

• The camera or battery have become too cold and 

cannot operate properly.

• The inside of the camera has become hot. Leave 

the camera off until the inside of the camera has 
cooled, and then try turning it on again.

• The camera turns off if the USB cable connecting it 

to a computer or printer is disconnected. 
Reconnect the USB cable.

–

Monitor is blank.

• The camera is off.
• The camera has entered standby mode to save 

power. Press the power switch, shutter-release 
button, A button, 

c button, or b (e movie-

record) button.

• The flash lamp flashes while the flash is charging. 

Wait for the flash to charge.

• The camera and computer are connected via the 

USB cable.

• The camera and TV are connected via an audio/

video cable or HDMI cable.

83, 

Monitor is hard to read.

• Adjust the monitor brightness.
• The monitor is dirty. Clean the monitor.

78, 

Date and time of recording 
are not correct.

• If the camera clock has not been set, the “Date not 

set” indicator flashes during shooting and movie 
recording. Images and movies saved before the 
clock is set are dated “00/00/0000 00:00” or “01/01/
2013 00:00” respectively. Set the correct time and 
date from the Time zone and date option in the 
setup menu.

• The camera clock is not as accurate as ordinary 

watches or clocks. Periodically compare the time of 
the camera clock with that of a more accurate 
timepiece and reset as required.

Problem

Cause/Solution

A