Toshiba Client Solutions CO. LTD. UPSUL1PC1 Manuel D’Utilisation
CPU
This function allows you to set the processor's operating mode.
Dynamic CPU Frequency Mode
This option allows you to configure the power saving modes associated
with the processor - the following settings are available:
with the processor - the following settings are available:
Dynamically
Switchable
Switchable
The processor's automatic clock speed switching
function is enabled - in use the processor's
operation is automatically switched when
necessary.
function is enabled - in use the processor's
operation is automatically switched when
necessary.
Always High
The processor's automatic clock speed switching
function is disabled - in use the processor will
always run at its highest level of power
consumption and its highest speed.
function is disabled - in use the processor will
always run at its highest level of power
consumption and its highest speed.
Always Low
The processor's automatic clock speed switching
function is disabled - in use the processor will
always run at a lower level of power consumption
and a low speed.
function is disabled - in use the processor will
always run at a lower level of power consumption
and a low speed.
Boot
This tab allows you to modify the boot settings.
Boot Priority Options
This option allows you to set the priority for booting the computer. Click the
Up and Down buttons to adjust the priority.
To change the boot drive, follow the steps below.
1.
Up and Down buttons to adjust the priority.
To change the boot drive, follow the steps below.
1.
Hold down F12 and boot the computer. Release the F12 key one
second after the computer is power on.
second after the computer is power on.
2.
Use the up and down cursor keys to select the boot device you want
and press ENTER.
and press ENTER.
If your computer does not load the Boot menu, please refer to the
section.
If a Supervisor Password has been set, manual boot device selection
functions may be restricted.
The boot device selection methods described above will not change the
boot priority settings that have been configured in TOSHIBA System
Settings. In addition, if you press a key other than one of those listed, or if
the selected device is not installed, the system will continue to boot
according to the current and available settings in TOSHIBA System
Settings.
functions may be restricted.
The boot device selection methods described above will not change the
boot priority settings that have been configured in TOSHIBA System
Settings. In addition, if you press a key other than one of those listed, or if
the selected device is not installed, the system will continue to boot
according to the current and available settings in TOSHIBA System
Settings.
User's Manual
5-11