Williams Sound T45 Manuel D’Utilisation

24

The IP Address field is where the static IP Address is set.  In order to change the IP Address, the “IP Address Mode” must be set 
to “Static” before performing these steps.  If the IP Address mode is set to “DHCP”, you will not be able to change the IP address.

1.  Press the Menu button. The display will show “AUDIO SETTINGS” in the selection box.

2.  Press the “v” button repeatedly until “ADD-ON MODULE” is displayed in the selection box.

3.  Press the “>” button to access the Add-On Module settings.

4.  Press the “v” button repeatedly until “IP ADDRESS” is displayed in the selection box.

5.  Press the “>” button to access the “IP ADDRESS” field.  The screen will have a blinking underline under the first character 

position.  If an IP Address was previously entered, or an address was automatically assigned by DHCP, the character 
positions will already be filled with the current IP Address.

6.  Press the “^” or “v” buttons to scroll through the numbers.

7.  Press the “>” button to advance to the next position.

8.  Repeat steps 6 and 7 until the last number is changed.

9.  Press the “>” button to exit out of the IP Address field.  The new static IP Address is now active.

10.   Press the Menu button to exit the menu and return to the main info screen.

No additional action is necessary.  If no buttons are pressed, after 5 minutes the OLED will return to the Main Info Screen, then 
after another 5 minutes show a screen saver, then go blank (the time between the screen saver and blank screen is adjustable).   
When the display is blank, and the “RF” indicator is lit, the transmitter is broadcasting.  If audio is present the audio input level 
LED’s will pulse with the level of the audio.