Broadcast Microwave Services Inc CCII-4H Manuel D’Utilisation

 

 

Broadcast Microwave Services, Inc. – 12367 Crosthwaite Circle – Poway, CA 92064 

13  

Phone: 800-669-9667, 1-858-391-3050 - Fax: 1-858-391-3049 

Email: 

support@bms-inc.com

   Web: 

www.bms-inc.com

 

 

4965.00 MHz 
FREQUENCY 
4965.00 MHz 
NO VIDEO 

 
 

 

 
When the CARRY-CODER starts up, it is in the same condition as when it was powered down. This allows the user to 
replace the battery with no need to touch the controls. 

 

 

 
The CARRY-CODER II will not transmit with out video.  If the System is powered up without video, the CARRY-
CODER II will automatically reboot once video input starts.  The CARRY-CODER II will transmit with ASI. 

 

 
When the control panel display shows normal system status (no Error or Warning status message) and if there is no operator use of 
the control panel, the display goes dark to save battery life. Pressing any key on the control unit restores the display to show the 
status of the system. 
 

 

 
If there is a status message, the display will remain lit (will not go dark) until the problem is resolved. 

 
 
The user menus can be accessed from the status screen by pressing any key. Then, the user can scroll the menus by pressing the 
« Ç » and « È » keys. 
 
After 30 seconds of keypad inactivity, the display automatically returns to the status screen. 
 
 

 

 
Pressing the « Ç » and « È » keys simultaneously will cause the display to go to the status screen without having to 
wait 30 seconds. 

 
 

 

 
Type 

   Composite 

Video Baseband Signal (CVBS) 

Systems  

 

 

NTSC 525 lines / 60 Hz / Fsc = 3.58 MHz 

 

 

 

 

PAL 625 lines / 50 Hz / Fsc = 4.43 MHz 

Standard   ITU-R 

BT 

470-6 

Impedance 

  75 

Ohms 

 

 
Type 

 

 

 

YUV (formerly Y / Pb / Pr) 

Systems  

 

 

NTSC 525 lines / 60 Hz 

 

 

 

 

PAL 625 lines / 50 Hz 

Standard   ITU-R 

BT 

470-6 

Impedance 

  75 

Ohms