IDT Europe GmbH ZWIR4532 Manuel D’Utilisation
Low Power 6LoWPAN
Communication Module
ZWIR4532
Advance Datasheet
© 2018 Integrated Device Technology, Inc.
1
November 13, 2018
Description
The ZWIR4532 is a programmable low-power secure IPv6
communication module for internet of things (IOT) device networks.
Sensors and devices can operate autonomously or connect to local
or global IPv6 networks using the ZWIR4532. The ZWIR4532
serves as a universal secure radio communication module for
applications with low bandwidth requirements.
The module incorporates an ultra-low-power ARM
communication module for internet of things (IOT) device networks.
Sensors and devices can operate autonomously or connect to local
or global IPv6 networks using the ZWIR4532. The ZWIR4532
serves as a universal secure radio communication module for
applications with low bandwidth requirements.
The module incorporates an ultra-low-power ARM
®
Cortex™-M0+
32-bit microcontroller which is running the network stack. In
addition, the user application can run on the microcontroller. This
helps minimizing the size, complexity and overall BOM. A rich set
of digital and analog peripherals is available for interfacing with
external application components. Approximately 128kB of flash
and 4kB of RAM are available for user applications.
IDT offers the SensorShare user programmable royalty-free
6LoWPAN network stack with mesh routing capability for the
ZWIR4532. 6LoWPAN is an Internet Engineering Task Force (IETF)
standard for wireless low-power IPv6-based sensor and device
networks.
Secure communication is provided by a standard-compliant
implementation of the Internet Protocol Security (IPSec) protocol
suite.
addition, the user application can run on the microcontroller. This
helps minimizing the size, complexity and overall BOM. A rich set
of digital and analog peripherals is available for interfacing with
external application components. Approximately 128kB of flash
and 4kB of RAM are available for user applications.
IDT offers the SensorShare user programmable royalty-free
6LoWPAN network stack with mesh routing capability for the
ZWIR4532. 6LoWPAN is an Internet Engineering Task Force (IETF)
standard for wireless low-power IPv6-based sensor and device
networks.
Secure communication is provided by a standard-compliant
implementation of the Internet Protocol Security (IPSec) protocol
suite.
Typical Applications
Industrial automation
Home and building automation
Health monitoring
Telemetry
Features
License-free 868/915 MHz frequency bands
4 channels in EU frequency band (865.3 – 868.3 MHz)
10 channels in US frequency band (906 – 924 MHz)
BPSK or O-QPSK modulation selectable
BPSK with 20kBps EU and 40kBps U
ARM
®
Cortex™-M0+ 32-bit ultra-low-power microcontroller
192kB flash and 20kB RAM
6kByte EEPROM
5 UART interfaces
1 SPI interface
3 I²C interfaces
10 PWM outputs
12 bit ADC with 10 input channels
2 analog comparators
31 GPIOs
Network Stack
UDP/IPv6 communication
Mesh networking with hundreds of nodes
Self-healing defective routes
Over-the-Air update capable
Network layer security
Ultra-low power stop mode: < 1µA with full RAM retention
Supply voltage: 1.8V to 3.3V
-40°C to +85°C ambient operating temperature
15.6 × 12 mm 43-LGA Package
Block Diagram