T.W.S. srl 6081-001 Manuel D’Utilisation
Installation Note
The mechanical installation of the module is made using the 3 holes that are present on the E43
main board. Also the 3 connector P912, P601 and P740 have been to fixed using the proper nuts
and gaskets.
main board. Also the 3 connector P912, P601 and P740 have been to fixed using the proper nuts
and gaskets.
The internal GPS antenna, if it is used, has to be located as far as of the main board. This to have
better S/N ratio of the GPS signal reception.
better S/N ratio of the GPS signal reception.
The internal WIFI antenna has to be connected to the P911 MHF connector. Using the WLP2450
kit antenna all the connections are already made, you only have to connect the MHF connector to
P911.
kit antenna all the connections are already made, you only have to connect the MHF connector to
P911.
The External WIFI antenna has to be connected to the P912 SMA reverse connector.
5