Nikko Co Ltd RA4040H Manuel D’Utilisation

Page de 6
English
4
When you connect the connectors. Make sure the vehicle 
switch is in the “OFF” position.
Fixed connectors properly.(The connectors are designed to be 
connected in only one way so that the positive(+) and the 
negative(-) terminals are connected accurately.)
Disconnect the connectors immediately after played.
When you disconnect the connectors, be careful do not pull the 
wire too strongly.
Avoid short circuits because it is very dangerous.
Remove all the batteries both from the vehicle and the 
transmitter after played.
+
+ -
-
+
+ -
-
Vehicle's connector
Battery’s Connectors
High
4. HOW TO PLAY
(1) Extend the transmitter
     antenna.
(2) Switch on the boat .
 
(3)  Switch ON the transmitter by
       operating the control stick.
      ( The power indicator will
        light up) 
(4)  Start operating the boat.
(5)  Turn OFF the boat
       after operating.
Steering
control stick
Forward / Reverse
control stick
Red LED power indicator
LEFT / STRAIGHT / RIGHT
FORWARD
STOP
(NEUTRAL)
REVERSE
Battery’s Connector
Boat’s connector
Dive Button
O
N
O
F
F
Transmitter
O
N
O
F
F
SKIMMING & DIVING ACTION
(1) Push forward control stick to start operate the boat.
(2) When the boat reaches high speed, push the dive button 
      to perform the diving action.
Push dive button and watch the super fast 
skimming and diving action.
Dive Button
Due to the high speeds of this boat, Nikko does not recommend this boat for use in a 
liner pool or pool with a liner.  Nikko will not be held responsible for any damage that 
may occur to pool liners from the use of this boat.
CAUTION: NOT RECOMMENDED FOR USE WITH POOL LINERS