Nikko Co Ltd RP4200H Manuel D’Utilisation
Please read this user’s guide before
installing, setting up and using your new product
www.radioshack.com
Your boat is not designed for use in oceans, rivers, lakes or streams. Use in a swimming pool,
pond or small body of water.
Attach the antenna to your transmitter.
Slide the boat’s antenna wire through the supplied tube. Then, insert
pond or small body of water.
Attach the antenna to your transmitter.
Slide the boat’s antenna wire through the supplied tube. Then, insert
the tube into the antenna tube holder.
Turn your boat and transmitter on.
Place your boat in the water and use the transmitter’s controls to
Place your boat in the water and use the transmitter’s controls to
operate it. Your transmitter’s LED lights when you move the controls.
in your transmitter
Your transmitter requires one 9V
alkaline battery (not supplied,
available at your local RadioShack
store or online at
www.radioshack.com).
Press OPEN and pull
alkaline battery (not supplied,
available at your local RadioShack
store or online at
www.radioshack.com).
Press OPEN and pull
the battery cover
downward.
downward.
Insert your 9V battery,
matching the polarity
(+ and -) symbols
marked inside.
(+ and -) symbols
marked inside.
Replace the cover.
When your transmitter’s range decreases, replace
its battery.
its battery.
in your boat
Your boat requires one 9.6V
rechargeable nickel-metal hydride
(Ni-MH) battery pack (not supplied,
available at your local RadioShack
store or online at
www.radioshack.com). You must
charge it before use. Follow the
manufacturer’s instructions for charging your
battery pack.
rechargeable nickel-metal hydride
(Ni-MH) battery pack (not supplied,
available at your local RadioShack
store or online at
www.radioshack.com). You must
charge it before use. Follow the
manufacturer’s instructions for charging your
battery pack.
Turn your boat off.
Turn the right and left latches toward the
Turn the right and left latches toward the
OPEN arrow and remove the cover.
Attach the battery pack’s
connector to the boat’s
connector. Do not force
them; they fi t only one
way.
connector. Do not force
them; they fi t only one
way.
Carefully insert the
wires into the battery
compartment and replace the cover.
compartment and replace the cover.
60-4411
caliente RC boat
RC Boat & Stand
Transmitter Antenna
Boat Antenna Tube
User’s Guide
Transmitter
Thank you for purchasing your RadioShack
Caliente RC Boat from RadioShack. Your boat
comes in two frequencies (27 MHz and 49
MHz), so you and your friends can have fun
driving together.
Caliente RC Boat from RadioShack. Your boat
comes in two frequencies (27 MHz and 49
MHz), so you and your friends can have fun
driving together.
Note: Actual product may vary from the
images found in this document.
images found in this document.
WARNING!
Do not submerge your transmitter or leave it in water.
Store your boat on the included stand when not in use.
Connector
Release to Stop
LED
Forward
Reverse
Left
Release to go Straight
Right
Antenna tube