Tecom Co Ltd BT3021 Manuel D’Utilisation
TECOM CO., LTD.
TECOM Bluetooth Access Point PROJECT
Prepared by: CPE-U1
Internal Document
[Product Revision Information]
Page
Revision
Date Issued
User's Manual
2
(4)
0.1
08-30-2002
2.3. Bluetooth Clients supported
Point-to-multipoint with 1.1 clients supporting:
LAN Access Profile (LAP)
WEBSITE UPDATES FOR COMPATIBILITY MATRIX???
Point-to-multipoint with 1.1 clients supporting:
LAN Access Profile (LAP)
WEBSITE UPDATES FOR COMPATIBILITY MATRIX???
2.4. Configuration and Management
Local connection, over Bluetooth or Ethernet LAN
HTTP-based interface (RFC 2616/2617)
DHCP (RFC 2131) Client and Server
Static IP addressing
Local connection, over Bluetooth or Ethernet LAN
HTTP-based interface (RFC 2616/2617)
DHCP (RFC 2131) Client and Server
Static IP addressing
2.5. Bluetooth Radio
PARTNERSHIP DEALS
PARTNERSHIP DEALS
2.6. Bluetooth Security
Security Mode 1 (non-secure)
Security Mode 2 (service level enforced security)
Security Mode 3 (link level enforced security)
128-bit link level authentication
128-bit link level encryption
Non-discoverable mode
Security Mode 1 (non-secure)
Security Mode 2 (service level enforced security)
Security Mode 3 (link level enforced security)
128-bit link level authentication
128-bit link level encryption
Non-discoverable mode
2.7. Physical
LED Status Indicators: Power/Status, Bluetooth and Ethernet Link and Activity
Hardware connectors: LAN port: RJ-45
Input Power Requirement: 6 to 9 VDC, 1.0 amp
LED Status Indicators: Power/Status, Bluetooth and Ethernet Link and Activity
Hardware connectors: LAN port: RJ-45
Input Power Requirement: 6 to 9 VDC, 1.0 amp
3. Advanced Management and Configuration
Bluetooth Access Point reference design has two of the most usable management and
configuration interfaces in the market.
The basic Web Interface let user can monitor and configure Access Point and all of
Bluetooth devices information in anywhere.
Locator™ is a multi-purpose cross-platform PC utility that can manage all bluetooth
devices in a network through its simple interface. It is an ideal tool for auto-IP
assignment, IP settings, firmware upgrades, and Web Interface discovery.
configuration interfaces in the market.
The basic Web Interface let user can monitor and configure Access Point and all of
Bluetooth devices information in anywhere.
Locator™ is a multi-purpose cross-platform PC utility that can manage all bluetooth
devices in a network through its simple interface. It is an ideal tool for auto-IP
assignment, IP settings, firmware upgrades, and Web Interface discovery.
3.1. Web Management and Configuration
If you have successful gone through the Quick Installation procedure in a
DHCP-enabled network, you may want to monitor the Bluetooth activity on your
Access Point through the Web Interface.
Information page will display System Information such as the Bluetooth name of the
Access Point, as well as, its firmware version and MAC address. It will also display
network setup information such UBAP’s Internet Settings (IP Address, Subnet Mask,
Gateway and DNS entries).
Devices page will display the IP and MAC addresses of all the currently connected
Bluetooth clients.
If you have successful gone through the Quick Installation procedure in a
DHCP-enabled network, you may want to monitor the Bluetooth activity on your
Access Point through the Web Interface.
Information page will display System Information such as the Bluetooth name of the
Access Point, as well as, its firmware version and MAC address. It will also display
network setup information such UBAP’s Internet Settings (IP Address, Subnet Mask,
Gateway and DNS entries).
Devices page will display the IP and MAC addresses of all the currently connected
Bluetooth clients.