Tecom Co Ltd BT3035 Manuel D’Utilisation
©
2002 by TECOM CO., LTD. All rights reserved.
28
Information Synchronization
Network Access
Property settings which are common to all of the local services
We mentioned earlier that you could change the settings of each service individually. However, all
of the local services will have common settings for all of the following:
Authentication
Authorization
Encryption
Startup
Service name
While each of the local service includes all of the above common settings, some services have an
additional setting that is only available to it and will not be found elsewhere:
Network Access: has an additional setting for the maximum
number of connections allowed at any time.
number of connections allowed at any time.
Dial-up Networking: has an additional setting for selecting the
modem that the service will be using.
modem that the service will be using.
Fax: has an additional setting for selecting the modem that the
service will be using.
service will be using.
Bluetooth Serial Port: has an additional setting for selecting the
communications port that the service will be using.
communications port that the service will be using.
Adding a user-defined Bluetooth Serial Port
Most applications that use a serial connection may also use wireless Bluetooth Serial port service
to transfer data. The Bluetooth Serial Port replaces all physical cables, thus reducing clutter.
When using BTW, you will have one pre-configured Bluetooth Serial Port. However, you can
always add another when needed. Similarly, you may remove it any time.
To add a Bluetooth Serial Port:
1. Open the Bluetooth Configuration Panel by right-clicking the
Bluetooth Tray icon on the Windows system tray. Select Setup
and then select Configuration from the submenu. The Bluetooth
Configuration Panel is displayed.
and then select Configuration from the submenu. The Bluetooth
Configuration Panel is displayed.
2. Click
the
Local Services tab.
3. Click
the
Add Serial Service button.
4. In
the
Service Properties dialog box that appears, modify these:
Enter a unique name (less than 99 alphanumeric characters).
Select the appropriate security settings.
Select Startup if you want the service to start automatically
when BTW initializes.
when BTW initializes.
From the COM Port drop-down list, select a communications
port that is not assigned to any other service.
port that is not assigned to any other service.