Tecom Co Ltd WIFIVOIPHS Manuel D’Utilisation

•  Used Key: current key used is displayed. Press ‘ ’ and use   

                                      ‘

▲

’‘

▼

’ buttons to select ‘None’ (no key used) or one 

                                      of the 4 keys (Key 1~4). Press ‘ ’ to submit your   
                   change and return to sub-Menu. 

•  WEP Key Settings: press ‘ ’ to enter sub-Menu. Two options 

                                                   are available: ‘64 bit’ and ‘128 Bit’. Both   
                                                    options can configure 4 keys. Use ‘

▲

’‘

▼

’  

                                                    buttons to select the key to edit then press 
                                                    ‘ ’ to enter EDIT mode.   

  use keypad to enter proper values; 
  press ‘ ’ to delete character;   
  press ‘ ’ after editing is finished;   
  hold ‘ ’ to exit EDIT mode without   

                                                        any change and return to the sub-Menu. 

  Press ‘Apply’ to save and submit your   

                                                          configuration. 

 

Note: For 64 Bit WEP key, 5 ASCII characters are used. For 128 Bit WEP key, 13   
     ASCII characters are used. 
 

                   

 
Configure SIP Settings 
 

-  From start-up Menu, press button ‘ ’ to open Main Menu. 
- Use 

‘

▲

’‘

▼

’ buttons to scroll up/down the Menu to ‘Call Settings’, then press 

‘ ’. 

-  Choose sub-Menu ‘SIP Settings’, then press ‘ ’. Use ‘

▲

’‘

▼

’ buttons to select 

the following items: 

  User Name: name of the phone. Should be unique in your network. 

                           Default: ‘user’. 

  Registrar: two sub-Menu available: 

    Set Reg IP: configure IP address of the registrar in your 

network. Default: ’172.24.16.188:5060’.