Sigma Designs Inc ZM5304-U Manuel D’Utilisation
DATASHEET: ZM5304
DSH12461-3 | 7/2013
1
FULLY INTEGRATED Z-WAVE® WIRELESS MODEM WITH
ON-BOARD ANTENNA
ON-BOARD ANTENNA
The Sigma Designs ZM5304 Modem is a fully integrated Z-Wave modem
module in a small 27mmx15.2mmx5.5mm form factor. It is an ideal
solution for home control applications such as access control, appliance
control, AV control, building automation, energy management, lighting,
security, and sensor networks in the “Internet of Things”.
module in a small 27mmx15.2mmx5.5mm form factor. It is an ideal
solution for home control applications such as access control, appliance
control, AV control, building automation, energy management, lighting,
security, and sensor networks in the “Internet of Things”.
A baseband controller, sub-1 GHz radio transceiver, crystal, decoupling,
SAW filter, matching, and the antenna is included to provide a complete
Z-Wave solution to an application executing in an external host
microcontroller. The ZM5304 Modem is certified with the FCC modular
approval, ready to be used in any product without additional testing and
license costs.
SAW filter, matching, and the antenna is included to provide a complete
Z-Wave solution to an application executing in an external host
microcontroller. The ZM5304 Modem is certified with the FCC modular
approval, ready to be used in any product without additional testing and
license costs.
The ZM5304 Modem is based on an 8-bit 8051 CPU core, which is
optimized to handle the data and link management requirements of a
Z-Wave node. The UART or USB interface can be used to access the
Z-Wave stack available in the on-chip Flash memory, or to easily upgrade
the modem firmware.
optimized to handle the data and link management requirements of a
Z-Wave node. The UART or USB interface can be used to access the
Z-Wave stack available in the on-chip Flash memory, or to easily upgrade
the modem firmware.
FCC ID
TBD
IC ID
TBD
Features
Complete Z-Wave stack available over
UART or USB
UART or USB
32kB of byte addressable NVM memory
Fully Integrated crystal, EEPROM, SAW
filter, matching circuit, and antenna
filter, matching circuit, and antenna
Supply voltage range from 2.3V-3.6V for
optional battery operation
optional battery operation
No external components required
FCC modular approval
CE self-certified
ITU G.9959 compliant
Radio Transceiver
Receiver sensitivity with SAW filter down
to -103dBm
to -103dBm
Transmit power with SAW filter up to
+2dBm
+2dBm
Z-Wave 9.6/40/100kbps data rates
Supports all Z-Wave sub-1 GHz frequency
bands (865.2-926.3 MHz)
bands (865.2-926.3 MHz)
Supports multi-channel frequency agility
and listen before talk
and listen before talk
Regulatory Compliance
ACMA: AS/NZS 4268
CE: EN 300 220/489
FCC: CFR 47 Part 15 Modular Approval
IC: RSS-GEN/210
MIC: ARIB STD-T108
ACMA: AS/NZS 4268
CE: EN 300 220/489
FCC: CFR 47 Part 15 Modular Approval
IC: RSS-GEN/210
MIC: ARIB STD-T108
Modem
UART speed up to 230.4kbps
USB 2.0 full speed
Z-Wave serial API accessed over UART or
USB
USB
Firmware upgradeable via UART or USB
TX mode current typ. 40mA @ +2dBm
RX mode current typ. 32mA
Normal mode current typ. 15mA
Sleep mode current typ. 2µA
Less than 1ms cold start-up time
Power-On-Reset / Brown-out Detector