Lectrosonics Inc SSMB1 Manuel D’Utilisation

7

Attaching and Removing 

the Microphone

Align the ridges on the plug with the grooves in the jack 

and insert the plug.

Slide the threaded sleeve onto the jack and rotate it 

clockwise to tighten it.

Connectors and USB Port

The housing is machined out of a solid aluminum billet 

for a rugged, lightweight assembly.

The antenna is a flexible whip made of galvanized steel, 

permanently attached to the transmitter to prevent 

damage from heavy use. The IR port is capped with 

a translucent dome material to broaden the reception 

angle. The input jack is a rugged 3-pin LEMO connector 

with a threaded locking sleeve.
The opposite end of the transmitter contains the battery 

door latches and release tabs, and the USB port, which 

is used for firmware updates.

The battery door itself is made of stainless steel to 

allow a thin wall thickness, but retain the strength to 

withstand heavy use.