3Com Corporation 3CRWE50194 Manuel D’Utilisation
Client Privileges
27
To assign client privileges:
1 Choose an IP address from the available pool.
Click the up/down arrows to view the available pool of
IP addresses. Click one to choose it, and write it down
on a piece of scrap paper.
IP addresses. Click one to choose it, and write it down
on a piece of scrap paper.
2 Choose the services you want to block.
Below the drop-down menu is a series of Internet
services (E-mail, WWW, FTP, News [NNTP], Telnet). Click
the checkbox next to the service (or services) you want
to block.
services (E-mail, WWW, FTP, News [NNTP], Telnet). Click
the checkbox next to the service (or services) you want
to block.
3 Choose the block time.
If you want the services you chose in step 2 to be
blocked permanently, click the Always button.
You can also identify a period of time in which the
services are blocked. To do this, click the Block from:
button, and choose a daily and weekly time period from
the drop-down menus.
blocked permanently, click the Always button.
You can also identify a period of time in which the
services are blocked. To do this, click the Block from:
button, and choose a daily and weekly time period from
the drop-down menus.
4 Click Save.
5 Set the IP address on the computer.
Now that the gateway knows which services to block
and when to block them, you must set up the computer
on which you intend to block the services.
and when to block them, you must set up the computer
on which you intend to block the services.
On the selected computer, go to the IP address dialog
box (in Windows, select Start, Settings, Control Panel,
Network, TCP/IP, and Properties to get to the IP address
dialog box; on a Macintosh, select Apple Menu, Control
Panels, TCP/IP).
box (in Windows, select Start, Settings, Control Panel,
Network, TCP/IP, and Properties to get to the IP address
dialog box; on a Macintosh, select Apple Menu, Control
Panels, TCP/IP).
In the IP address dialog box, in Windows select Specify
an IP address or, on a Macintosh, from the Configure:
drop-down menu, select Manually, and enter the IP
address you chose in step 1.
an IP address or, on a Macintosh, from the Configure:
drop-down menu, select Manually, and enter the IP
address you chose in step 1.
6 Restart your computer to save the changed settings.
To block services on other computers on your network,
choose another IP address from the available pool, and
repeat the procedure.
choose another IP address from the available pool, and
repeat the procedure.