3Com Corporation WL306 Manuel D’Utilisation

Page de 56
14
C
HAPTER
 2: I
NSTALLING
 
THE
 A
CCESS
 P
OINT
antenna to achieve the maximum possible received signal strength. See “Using the 
Site Survey Tool” on page 37 for mor
e information.
Position the antenna so that there are minimal 
obstacles between it and any client with which 
it will communicate. While maintaining a direct 
line of sight between the antenna and a client 
is not strictly necessary, such an arrangement 
helps to ensure a strong signal. Ensure that 
access is available for routing the antenna cable 
from the antenna to the access point.
If they are installed, remove both arms of the 
the standard detachable antenna.
Connect one end of the optional antenna cable 
to the antenna and secure the antenna in place.
Connect the free end of the antenna cable to 
the A side connection on the access point.
Make certain that the antennas and antenna 
masts are appropriately grounded to prevent 
injury or damage from lightning strikes.
Go to Data Transmission Properties and change 
the Radio Antenna settings to Diversity Off. See “Setting Data Transmission 
Properties” on page 27.
If required in your country or at your site, go to Data Transmission Properties and 
Installing Software 
Utilities
The 3Com Administrator Utilities CD includes tools and utilities to help you set up 
and administer the wireless components of your network. Software tools and 
utilities are presented as Tools and Utilities options on the main menu of the CD 
and include:
Install the Utility Software and Documentation. This option installs the 
Wireless Infrastructure Device Manager Tool which you can use to monitor 
access points and select devices for administrative changes. It also installs the 
Site Survey Tool and product documentation in other languages as translations 
become available.
Install 3Com TFTP 3CDaemon Server Tool. A TFTP server is required for 
firmware upgrades and for backing up and restoring access point configuration 
files. This option launches the 3CDaemon installation, which is a resident TFTP 
server. You do not have to select this option if you already have a TFTP server 
set up. The 3CDaemon server tool can also act as a system log (syslog) server 
for the access point.
Install 3Com 802.1x Agent. This option installs the Wireless Authentication 
Agent for 802.1x support. If you will be using the access point in conjunction 
with a RADIUS authentication server, you must install this agent on each 
wireless client PC in the network. On systems running Windows XP this agent 
is not required because 802.1x support is built into the operating system.
"A" side