Sennheiser Electronic Corp SR2000 Manuel D’Utilisation
Using the transmitter
14
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via the “
Auto Lock
” menu item. If the
lock mode is activated, you have to temporarily deactivate it In order to be able to operate
the transmitter:
the transmitter:
The lock mode icon
&
flashes prior to the lock mode being activated again.
Activating/deactivating the RF signal
To
deactivate
the RF signal:
To
activate
the RF signal:
To
deactivate the RF signal
on
switch-on
:
왘
See “offline operation” on page 13.
Adjusting the audio channels
Via the “
Mode
” menu item, you can adjust the audio channels.
왘
Select “
Stereo
” if you want to transmit two separate audio signals on channel I and
channel II (e.g. channel I
= audio signal of the presenter/musician, channel II
= sum of all
audio signals).
This allows the presenter/musician to adjust the balance between the left and right stereo
signal on his receiver.
This allows the presenter/musician to adjust the balance between the left and right stereo
signal on his receiver.
왘
Select “
Mono
” if you only want to transmit an audio signal on one channel. In this case,
the signal from the left audio input
BAL AF IN L (I)
is transmitted.
왘
Press the jog dial.
“
“
Locked
” appears on the display panel.
왘
Turn the jog dial.
“
“
Unlock?
” appears on the display panel.
왘
Press the jog dial.
The lock mode is temporarily deactivated.
The lock mode is temporarily deactivated.
– When you are in the operating menu, the lock mode remains deactivated until
you exit the operating menu.
– When the standard display is shown, the lock mode is automatically activated
after 10 seconds.
왘
When the standard display is shown on the display panel, press the
STANDBY
button.
“
“
RF Mute On?
” appears on the display panel.
왘
Press the jog dial.
The RF signal is deactivated. “
The RF signal is deactivated. “
RF Mute
” flashes in alternation with the standard
display and the display is backlight in red.
왘
Press the
STANDBY
button.
“
RF Mute Off?
” appears on the display panel.
왘
Press the jog dial.
The RF signal is activated and the display backlighting changes from red to
orange.
The RF signal is activated and the display backlighting changes from red to
orange.
Standard -18dB
MHz
PEAK
-10
0
-20
-30
-40
-30
-40
PEAK
-10
0
-20
-30
-40
-30
-40
AF II
AF I
**2000**
552.300
B.Ch: 5.14
EQ
&