OMG plc VICP1 Manuel D’Utilisation

Origin 
Setup & 
Maintenance 
Guide 

Vicon Motion Systems Ltd.

04-Sep-2018

Page 13 of 45

Turn on Beacon, check status and set pairing mode

1. Ensure Beacon is connected to a powered PoE switch and that this 

switch is connected to the host PC running Evoke.

In Evoke, on the System tab, notice that in the Connectivity section a 

Beacon entry is displayed.

2. Ensure that the Beacon connection status is green.

If a radio error flag is displayed, Beacon was unable to find a clear radio 

channel. This may be because other devices are transmitting at 2.4 

GHz and are interferring with the sync signal (e.g. mobile phones or Wi-

Fi routers).

3. On the System tab, select Beacon and 

in the Properties pane?

 set the

Pairing Mode:

• Auto Enables unpaired clusters to pair to this Beacon.

• Whitelist Enables you to select specific clusters to pair.

Only one connected Beacon can be in pairing mode at a time (Beacons 

in adjacent volumes may also be in pairing mode, but this is not 

recommended).