Checkpoint Systems Inc. FISOLRR Manuel D’Utilisation
I L S O p e n P l u s E x i t A n t e n n a I n s t a l l a t i o n : C o n n e c t i n g t h e A l a r m K i t t o t h e S e r i a l - t o - E t h e r n e t
Connect the LED Indicators
The optical alarm indicator, the Signal LED, is integrated into the upper frame section.
This means, when installing the antenna, the standard upper frame section is replaced by
the one having the signal indicator and the Signal LED is connected with the connection
cable.
This means, when installing the antenna, the standard upper frame section is replaced by
the one having the signal indicator and the Signal LED is connected with the connection
cable.
Figure 1.11
LED Annunciator Connection
1
See
for instructions on how to disassemble the
gate.
2
Once the top molding is removed, connect the pin to the LED connector. The brown
connector connects to the positive (+) terminal.
connector connects to the positive (+) terminal.
3
Ensure that the cable is properly connected to the serial-to-ethernet board as instructed
at
at
4
Reassemble the gate as instructed at
.