Somfy Systems RSZ Manuel D’Utilisation
GRABER
GRABER
GRABER
GRABER
GRABER
13
Adding Individual Control Back After Creating a Group
Adding individual control to shades which are part of a newly formed group. This remote will now be referred to as the
secondary control.
secondary control.
Adding a Secondary Controller
1. Starting with the primary control, press and release the
program button on the back side of the current remote
twice in rapid succession (one second between taps).
twice in rapid succession (one second between taps).
2. The LEDs will flash alternating amber and green to identify
inclusion mode.
3. Press and hold the program button on the secondary
remote control until the LEDs flash green, then release the
button.
button.
4. Both the primary and secondary remote LEDs will flash
green, then off confirming inclusion.
2x
1x
Hold
Hold
5. The secondary control is now ready for final steps to
control the shade.
6. Press and release the program button on the back side of
the secondary control once. The LEDs will alternately flash
green.
green.
7. Press and hold the program button on the target shade
headrail or motor end until the LED flashes green, then
release the button.
release the button.
8. The LED on the secondary control will turn green and the
shade will jog.
9. Both the primary (group) and secondary (individual)
controls will now operate the shade.
Repeat this process on all shades you want to individually
control.
control.