Mindray DS USA Inc. WT0707-00000 Manuel D’Utilisation
Panorama™ Operating Instructions
0070-10-0690-01
6 - 5
Patient Alarm Functions
Alarm Limits Tab (Patient)
FIGURE 6-2 Alarm Limits Tab
FIGURE 6-3 Alarm Limits Tab (ViewStation)
6.2.2
Configuring Patient Alarm Limits
The following procedure is used for modifying patient alarm limits in the Alarm Limits tab.
The order in which the alarm slider controls are shown in the Alarm Limits tab is selected
in the ‘‘Unit Priorities Tab’’ on page 9-47.
The order in which the alarm slider controls are shown in the Alarm Limits tab is selected
in the ‘‘Unit Priorities Tab’’ on page 9-47.
ViewStation patient tiles will always display the same patient alarm limit settings of the
associated patient tile at the host central station. For additional information regarding the
transfer of alarm limit settings from the host central station, refer to ‘‘Alarm Limits Tab
(Patient)’’ on page 6-4.
associated patient tile at the host central station. For additional information regarding the
transfer of alarm limit settings from the host central station, refer to ‘‘Alarm Limits Tab
(Patient)’’ on page 6-4.
NOTE:
The alarm slider controls in the patient Alarm Limits tab are
disabled at the ViewStation.
disabled at the ViewStation.
1. Choose a patient tile by selecting its digital data or waveform area.
Double Arrow Button
Single Arrow Button
Patient Demographic Field
Patient Size
Slider
Control
Control
Low Alarm
Limit Button
Limit Button
High Alarm
Limit Button
Limit Button
Up Arrow
Down Arrow
Scroll Bar
Double Arrow Button
Single Arrow Button
Patient Demographic Field
Patient Size
Scroll Bar