Mindray DS USA Inc. WT0707-00000 Manuel D’Utilisation

7.1.4.3

Navigating in the All ECG View

If the waveforms exceed the capacity of the viewable screen, use the navigational buttons to 
locate the desired waveform. The buttons are described as follows:

• The up arrow button moves the group of displayed waveforms up one position within 

the ordered set of waveforms

• The down arrow button moves the group of displayed waveforms down one position 

within the ordered set of waveforms

When a View 12

™

 

card is in use, the double up arrow/down arrow can be used to 

navigate:

• The double up arrow button displays the previous set of ECG waveforms 

• The double down arrow button displays the next set of ECG waveforms 

7.1.4.4

Performing ECG Waveform Measurements

ECG waveform measurements for time and amplitude can be performed in the All ECG view 
by using the Measure dialog box (shown in FIGURE 7-3). For additional information about 
performing waveform measurements, refer to ‘‘Performing ECG Waveform Measurements’’ 
on page 7-5.

7.1.4.5

Sidebar Buttons

The sidebar buttons available in this view are the same as the sidebar buttons described in 
the All Waveforms view. Please refer to page 7-6 for a full description of each of the 
sidebar buttons.