Rambo Industrial Limited BTR006 Manuel D’Utilisation

Enter 
pairing 
mode 

Ensure the receiver is turned 
off, otherwise turn it off first 
and then press and hold MFB 
button for 6～7 seconds until 
LED flashes red and blue 
alternately

LED 
flashes 
red and 
blue 
alternately

Two “DU”
tones 

Remark:  The pairing mode will last 2 minutes, the receiver BTR006 will 
switch to standby mode automatically if no devices can be connected within 
2 minutes. 
 
 
Pairing with Bluetooth mobile phone 
Ensure your mobile phone supports A2DP profile. The pairing procedures 
will vary depending on different models of mobile phones. Please refer to 
your mobile phone user’s manual for further information. The general 
pairing procedures are as follows: 
1)  Place the receiver and Bluetooth mobile phone where they are easily 

viewable by no more than 1 meter apart; 

2)  Enter the receiver’s pairing mode (please refer to “How to enter pairing 

mode); 

3)  Activate your mobile phone’s Bluetooth function and set your mobile 

phone to search for Bluetooth devices within range, and select “BTR006” 
from the list of devices shown; 

4)  According to the indication, enter password or PIN No: “0000”; 
5)  If prompted by your mobile phone to connect, select “Yes” (This will 

vary among mobile phone models); 

6)  After successful connecting, blue LED flashes twice quickly every 5 

seconds   

‹ 

If no devices can be connected within 5 minutes, the receiver will then 
turn off automatically in order to save power. 

‹ 

After successful pairing, the receiver and the mobile phone will 
remember each other, they will no need to re-pair next time.