Rockwell Collins Inc. 5972410 Manuel D’Utilisation
PSR-500
System Installation Guide
Page 101 / 125
CPN 222-3044-657 Rev B CAGEC F5491 Rockwell Collins - Proprietary Information
6.5. Validation
In order to evaluate the general performances of the installation, the best way to
proceed is to send people walk over the coverage of the radar.
Following this evaluation, two types of setting can be performed:
proceed is to send people walk over the coverage of the radar.
Following this evaluation, two types of setting can be performed:
- Update the equipment and their installation properties (see § 6.5.1)
- Update the zones, (see § 6.5.2)
6.5.1. Equipment and installation properties update
- Update the zones, (see § 6.5.2)
6.5.1. Equipment and installation properties update
The camera and radar installation properties can be updated through the « System
Management -> Equipment Configuration » menu.
Management -> Equipment Configuration » menu.
Figure 141 Equipment installation properties update
Radar installation properties update:
- Solution#1
o Disconnect from the radar to be updated (PU), update the radar
installation properties and re-connect to it. The PSR-500 Installer will
automatically detect a discrepancy between the current version of the
System Configuration of the PSR-500 Installer and what the radar is
aware of. The application proposes either to apply the modification to
automatically detect a discrepancy between the current version of the
System Configuration of the PSR-500 Installer and what the radar is
aware of. The application proposes either to apply the modification to