Rockwell Collins Inc. 8222210 Manuel D’Utilisation

Follow the guidelines in this section to ensure proper operation and safe use of the access point.

The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio 
frequency (RF) electromagnetic energy emitted by FCC certified equipment. When used with approved 
Cisco Aironet antennas, Cisco Aironet products meet the uncontrolled environmental limits found in 
OET-65 and ANSI C95.1, 1991. Proper installation of this radio according to the instructions found in 
this manual will result in user exposure that is substantially below the FCC recommended limits.

Do not hold any component containing a radio so that the antenna is very close to or touching any 
exposed parts of the body, especially the face or eyes, while transmitting.

Translated versions of the following safety warnings are provided in 

Read the installation instructions before you connect the system to its power source. Statement 1004

This product must be connected to a power-over-ethernet (PoE) IEEE 802.3af compliant power source or an 
IEC60950 compliant limited power source. Statement 353

This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that 
the protective device is rated not greater than: 20A Statement 1005

Do not operate your wireless network device near unshielded blasting caps or in an explosive 
environment unless the device has been modified to be especially qualified for such use. 
Statement 245B

In order to comply with FCC radio frequency (RF) exposure limits, antennas should be located at a 
minimum of 7.9 inches (20 cm) or more from the body of all persons. Statement 332

Do not work on the system or connect or disconnect cables during periods of lightning activity. 
Statement 1001