Rockwell Collins Inc. 8222210 Manuel D’Utilisation

D r a f t 1 A - C I S C O C O N F I D E N T I A L

2-17

Cisco Aironet 1240AG Series Access Point Hardware Installation Guide

OL-7293-01

Chapter 2 Installing the Access Point

Securing the Access Point

There are two ways to secure your access point:

•

Using a security cable

•

Securing the access point to the mounting plate

Using a Security Cable

You can secure the access point by installing a standard security cable (such as the Kensington Notebook
MicroSaver, model number 64068) into the access point security cable slot (see

Figure 2-2

). The security

cable can be used with any of the mounting methods described in this guide.

Follow these steps to install the security cable.

Step 1

Loop the security cable around a nearby immovable object.

Step 2

Insert the key into the security cable lock.

Step 3

Insert the security cable latch into the security cable slot on the access point.

Step 4

Rotate the key right or left to secure the security cable lock to the access point.

Step 5

Remove the key.

Securing the Access Point to the Mounting Plate

------------- TBD -------------

The security hasp enables you to use a padlock to secure the access point to the mounting plate. Known
compatible padlocks are Master Lock models 120T or 121T.

To install the security hasp, follow these steps:

Step 1

Insert the security hasp’s key pin (see

Figure 2-11

) into the key slot on the access point (see

Figure 2-2

)

and rotate counterclockwise towards the mounting plate.