Sony Corporation DTPT1000AB Manuel D’Utilisation
Overview
10
DTP-T2000A 4-121-350-11(1)
Unit front
Part names and usage
DRIVE SELECT
POWER
SYSTEM INIT
NETWORK INIT
UMD
CONTROLLER
GPO
GPI
ON OFF
DVD
0
7
6
5
4
3
2
1
0
1
2
3
4
5
6
7
1
Z
Z
1
On/standby button, power
indicator
This button turns the unit on and off.
To turn on the unit
Press the on/standby button while it is in standby
mode. The power indicator flashes green as the
power turns on. The indicator then turns solid
green when the system is ready. The system
status can be determined by the color and status
of the power indicator.
mode. The power indicator flashes green as the
power turns on. The indicator then turns solid
green when the system is ready. The system
status can be determined by the color and status
of the power indicator.
Turning the unit off (standby mode)
• Press the on/standby button and hold it down
for three seconds. The power indicator will
flash and then turn solid orange, at which point
the power will be turned off (and the system
will enter standby mode).
flash and then turn solid orange, at which point
the power will be turned off (and the system
will enter standby mode).
• Remove the power plug from the electrical
outlet after the power indicator turns solid
orange. If the plug is removed before the
indicator turns solid orange, failure of the unit
may result.
orange. If the plug is removed before the
indicator turns solid orange, failure of the unit
may result.
2
Disc cover
The open button (3) is used to open the cover
so that a UMD
so that a UMD
TM
can be inserted. When closing,
press the middle of the upper edge of the disc
cover.
cover.
3
Open button
This button is used to open the disc cover (2).
4
Memory Stick Duo
TM
access
indicator
Turns orange while the unit is accessing a
Memory Stick Duo
Memory Stick Duo
TM
or Memory Stick PRO
Duo
TM
that has been inserted into the unit.
5
Memory Stick Duo
TM
slot
This slot accepts Memory Stick Duo
TM
or
Memory Stick PRO Duo
TM
media.
6
USB connector
For connecting USB connectors (mini-B type).
When the included controller is connected to the
USB connector, the controller’s USB connector
becomes functional.
When the included controller is connected to the
USB connector, the controller’s USB connector
becomes functional.
7
Drive select button
Switches between the UMD
TM
drive and the
DVD-ROM drive.
The selected drive is identified by the UMD
The selected drive is identified by the UMD
TM
/
DVD-ROM drive indicators (8). The drive
select button (7) can be used only when the
power indicator of the controller is not lit.
select button (7) can be used only when the
power indicator of the controller is not lit.
8
UMD
TM
/DVD-ROM drive indicator
The indicator for the drive, UMD
TM
or DVD-
ROM, turns orange to indicate which drive is
selected.
selected.
9
Open/close button
This button is used to open/close the DVD-ROM
drive.
drive.
2
7
8
9
q;
qa
qs
3
4
5
1
6
qd
qf
qg
qh
Flashing green
Solid green
Flashing red
Solid red
Flashing orange
Solid orange
The system is preparing to
start up (flashes until the
system becomes available
after the on/standby button
is pressed)
start up (flashes until the
system becomes available
after the on/standby button
is pressed)
The system is starting up
(the unit can now be used)
(the unit can now be used)
During system initialization
(auto-recovery)
(auto-recovery)
System initialization or
update failure (indicates the
need to initialize the
system)
update failure (indicates the
need to initialize the
system)
During network initialization
Standby mode
Part names and usage